FD30S Smoke Control Doorsets for Worksop buildings
We fit FD30S smoke control doorsets for flats, stairs and corridors in Worksop and the rest of Nottinghamshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Whether your building is in central Worksop or on its edges towards Retford, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Worksop
Fire doors in Worksop sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30S fire doors cost in Worksop?
Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Worksop quote is fixed after survey and itemised door by door.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD30S fire doors are used in Worksop
Integral garage doors and protected stairways are among the most common settings for FD30S fire doors, in Worksop as elsewhere.
Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.
- Integral garage doors
- Protected stairways
- Lobby doors in blocks of flats
- Cross-corridor doors
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Nottinghamshire
Can you fit just one door in Worksop?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Nottinghamshire.
Do you cover Worksop?
Yes. We survey, supply and fit FD30S fire doors throughout Worksop and the rest of Nottinghamshire, including S80 and nearby Retford.
Can you work around tenants or staff in Worksop?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Also covering towns near Worksop
- Retford (7 miles)
- Staveley (10 miles)
- Mansfield (12 miles)
- Chesterfield (12 miles)
- Rotherham (13 miles)
- Sutton-in-Ashfield (14 miles)
More doorsets for Worksop
- Fire Door Supply & Fit in Worksop
- Fire Exit Doors in Worksop
- School & Healthcare Fire Doors in Worksop
- Security Fire Doors in Worksop
- FD30 Fire Doorsets in Worksop
- Glazed Fire Doors in Worksop
- Fire Door Replacement in Worksop
- Steel Fire Doors in Worksop
- FD30S Smoke Control Doorsets across Nottinghamshire
- All fire doors in Worksop