Getting fire door closers and ironmongery fitted in Worksop
Getting fire door closers and ironmongery right in Worksop means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Worksop is about 24 miles from Nottingham; we cover both, along with Retford, Staveley and Mansfield.
What the law says in Worksop
New and replacement fire doors in Worksop are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Fire door closers and ironmongery prices in Worksop
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Worksop quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need fire door closers and ironmongery
Seal and signage replacement and failed closers and hinges are among the most common settings for fire door closers and ironmongery, in Worksop as elsewhere.
Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Worksop.
What does a Worksop quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Worksop?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Fire Door Ironmongery & Closers near Worksop
- Retford (7 miles)
- Staveley (10 miles)
- Mansfield (12 miles)
- Chesterfield (12 miles)
- Rotherham (13 miles)
- Sutton-in-Ashfield (14 miles)
Other products in Worksop
- School & Healthcare Fire Doors in Worksop
- Steel Fire Doors in Worksop
- Flat Entrance Fire Doors in Worksop
- Fire-Rated Screens & Fanlights in Worksop
- Glazed Fire Doors in Worksop
- Stairwell & Escape Route Doors in Worksop
- Riser & Service Cupboard Doors in Worksop
- Fire Exit Doors in Worksop
- Fire Door Ironmongery & Closers across Nottinghamshire
- All fire doors in Worksop