Our Ashford, Kent supply and fit service
If your fire risk assessment in Ashford, Kent has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in TN24 are free and quotes are fixed and itemised.
Ashford, Kent is about 17 miles from Maidstone. Wherever your building is in TN24, we arrange survey and fitting dates around access and occupancy.
Regulations for FD90 and FD120 fire doors in Kent
In Ashford, Kent, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Ashford, Kent?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Ashford, Kent quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are used in Ashford, Kent
High fire-load stores and generator rooms are among the most common settings for FD90 and FD120 fire doors, in Ashford, Kent as elsewhere.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Ashford, Kent property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Kent
Do you work for landlords and managing agents in Ashford, Kent?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you fit just one door in Ashford, Kent?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Kent.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ashford, Kent.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Faversham (12 miles)
- Canterbury (13 miles)
- Folkestone (14 miles)
- Sittingbourne (15 miles)
- Whitstable (16 miles)
- Maidstone (17 miles)
More doorsets for Ashford, Kent
- FD60 Fire Doorsets in Ashford, Kent
- Fire-Rated Screens & Fanlights in Ashford, Kent
- Security Fire Doors in Ashford, Kent
- FD30 Fire Doorsets in Ashford, Kent
- Riser & Service Cupboard Doors in Ashford, Kent
- FD30S Smoke Control Doorsets in Ashford, Kent
- Commercial & Office Fire Doors in Ashford, Kent
- Fire Door Replacement in Ashford, Kent
- FD90 & FD120 Doorsets across Kent
- All fire doors in Ashford, Kent