FD90 and FD120 fire doors in New Malden: how we work
For landlords, managing agents, businesses and homeowners in New Malden, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Our Greater London coverage includes New Malden and its neighbours Surbiton, Morden and Wimbledon; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in New Malden
In New Malden, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in New Malden?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for New Malden are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
In New Malden, FD90 and FD120 fire doors are typically needed in high fire-load stores and transformer and switch rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Is the survey in New Malden free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in New Malden?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in New Malden.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near New Malden
- Surbiton (2 miles)
- Morden (2 miles)
- Wimbledon (2 miles)
- Ewell (4 miles)
- Mitcham (4 miles)
- Sutton (4 miles)
Other products in New Malden
- Commercial & Office Fire Doors in New Malden
- Stairwell & Escape Route Doors in New Malden
- Composite Fire Doors in New Malden
- Communal & Corridor Fire Doors in New Malden
- Double & Leaf-and-a-Half Fire Doors in New Malden
- Riser & Service Cupboard Doors in New Malden
- School & Healthcare Fire Doors in New Malden
- Fire Doors for Homes in New Malden
- FD90 & FD120 Doorsets across Greater London
- All fire doors in New Malden