Certified FD90 and FD120 fire doors for Brent
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Brent, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Brent is about 8 miles from London; we cover both, along with Wembley, Harrow and Greenford.
Fire door rules in Brent
Because Brent is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Greater London
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Brent quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are used in Brent
High fire-load stores and transformer and switch rooms are among the most common settings for FD90 and FD120 fire doors, in Brent as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Brent
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Brent: questions
Can you work around tenants or staff in Brent?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Brent.
How quickly can you survey in Brent?
We arrange surveys around your access needs and, where possible, combine Brent visits with other work in Greater London. Tell us your preferred dates when you enquire.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Brent
- Wembley (under a mile)
- Harrow (2 miles)
- Greenford (3 miles)
- Northolt (3 miles)
- Acton (3 miles)
- Willesden (3 miles)
More doorsets for Brent
- Double & Leaf-and-a-Half Fire Doors in Brent
- Fire Exit Doors in Brent
- Fire Door Replacement in Brent
- HMO Fire Doors in Brent
- Timber Fire Doorsets in Brent
- FD60 Fire Doorsets in Brent
- Fire Door Supply & Fit in Brent
- Riser & Service Cupboard Doors in Brent
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Brent