FD90 and FD120 fire doors in Wembley

Certified FD90 and FD120 fire doors for Wembley

Getting FD90 and FD120 fire doors right in Wembley means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Our Greater London coverage includes Wembley and its neighbours Brent, Harrow and Greenford; tell us your postcode and preferred dates and we'll confirm a survey slot.

Fire door rules in Wembley

New and replacement fire doors in Wembley are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Cost of FD90 and FD120 fire doors in Greater London

Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Wembley quote is fixed after survey and itemised door by door.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD90 and FD120 fire doors

In Wembley, FD90 and FD120 fire doors are typically needed in transformer and switch rooms and separating walls with long ratings.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

Transformer and switch rooms
Separating walls with long ratings
Generator rooms
High fire-load stores

What's in the doorset

Fire resistance	90 or 120 minutes (E90 / E120, EI where specified)
Construction	Usually steel; some specialist timber systems
Typical use	Plant rooms, transformer rooms, high-fire-load stores
Configurations	Single, double, with or without vision panels
Hardware	Steel-specific hinges, closers, panic hardware where needed

Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

How it works in Wembley

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Questions about FD90 and FD120 fire doors in Wembley

Do you cover Wembley?

Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Wembley and the rest of Greater London, including HA0 and nearby Brent.

Can you work around tenants or staff in Wembley?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

How quickly can you survey in Wembley?

We arrange surveys around your access needs and, where possible, combine Wembley visits with other work in Greater London. Tell us your preferred dates when you enquire.

Are FD120 doors always steel?

Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.

FD90 & FD120 Doorsets in Wembley