FD30S fire doors in Acton: how we work
We fit FD30S smoke control doorsets for flats, stairs and corridors in Acton and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Greater London coverage includes Acton and its neighbours Chiswick, Shepherd's Bush and Willesden; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Acton
New and replacement fire doors in Acton are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30S fire doors in Greater London
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Acton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD30S fire doors
Wherever they are in Acton, FD30S fire doors are most often specified for integral garage doors and lobby doors in blocks of flats.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Integral garage doors
- Lobby doors in blocks of flats
- Cross-corridor doors
- Protected stairways
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Acton property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD30S fire doors in Acton
Which rules do FD30S fire doors in Acton need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Acton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Acton?
Yes. We survey, supply and fit FD30S fire doors throughout Acton and the rest of Greater London, including W3 and nearby Chiswick.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Neighbouring areas
- Chiswick (1 mile)
- Shepherd's Bush (2 miles)
- Willesden (2 miles)
- Barnes (2 miles)
- Notting Hill (3 miles)
- Wembley (3 miles)
Other products in Acton
- Fire Door Ironmongery & Closers in Acton
- Security Fire Doors in Acton
- FD60 Fire Doorsets in Acton
- Acoustic Fire Doors in Acton
- Steel Fire Doors in Acton
- HMO Fire Doors in Acton
- Fire Door Supply & Fit in Acton
- Riser & Service Cupboard Doors in Acton
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Acton