Our Hull supply and fit service
Looking for FD30 fire doors in Hull? Our supply and fit service covers HU1 and the surrounding area, including Beverley and Grimsby. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Surveys in Hull are booked around your access needs, and we cover the wider East Riding of Yorkshire area too.
Regulations for FD30 fire doors in East Riding of Yorkshire
Fire doors in Hull sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Hull
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Hull are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are needed
Wherever they are in Hull, FD30 fire doors are most often specified for hotel corridors and plant rooms and stores.
Hull's port, industrial units and terraced housing sit alongside market towns such as Beverley and coastal resorts like Bridlington.
- Hotel corridors
- Plant rooms and stores
- HMO bedrooms and kitchens
- Offices and retail back-of-house
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD30 fire doors in Hull: questions
Do you cover Hull?
Yes. We survey, supply and fit FD30 fire doors throughout Hull and the rest of East Riding of Yorkshire, including HU1 and nearby Beverley.
How quickly can you survey in Hull?
We arrange surveys around your access needs and, where possible, combine Hull visits with other work in East Riding of Yorkshire. Tell us your preferred dates when you enquire.
What does a Hull quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Neighbouring areas
- Beverley (8 miles)
- Grimsby (16 miles)
- Scunthorpe (17 miles)
- Cleethorpes (18 miles)
- Goole (22 miles)
- Bridlington (24 miles)
More doorsets for Hull
- Flat Entrance Fire Doors in Hull
- HMO Fire Doors in Hull
- Double & Leaf-and-a-Half Fire Doors in Hull
- Stairwell & Escape Route Doors in Hull
- Commercial & Office Fire Doors in Hull
- Composite Fire Doors in Hull
- Fire Doors for Homes in Hull
- Communal & Corridor Fire Doors in Hull
- FD30 Fire Doorsets across East Riding of Yorkshire
- All fire doors in Hull