Certified FD90 and FD120 fire doors for Alfreton
Getting FD90 and FD120 fire doors right in Alfreton means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Derbyshire coverage includes Alfreton and its neighbours Ripley, Sutton-in-Ashfield and Kirkby-in-Ashfield; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in Derbyshire
Fire doors in Alfreton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Derbyshire
Guide prices for FD90 and FD120 fire doors in Alfreton run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Alfreton
Typical uses for FD90 and FD120 fire doors in Alfreton include separating walls with long ratings and high fire-load stores.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Alfreton
Can you fit just one door in Alfreton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Derbyshire.
Will I get certificates for the doors fitted in Alfreton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Alfreton.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Alfreton
- Ripley (4 miles)
- Sutton-in-Ashfield (6 miles)
- Kirkby-in-Ashfield (6 miles)
- Heanor (6 miles)
- Belper (7 miles)
- Mansfield (8 miles)
More doorsets for Alfreton
- FD30 Fire Doorsets in Alfreton
- Fire Doors for Homes in Alfreton
- Steel Fire Doors in Alfreton
- Acoustic Fire Doors in Alfreton
- FD30S Smoke Control Doorsets in Alfreton
- Double & Leaf-and-a-Half Fire Doors in Alfreton
- Fire-Rated Screens & Fanlights in Alfreton
- Fire Door Supply & Fit in Alfreton
- FD90 & FD120 Doorsets across Derbyshire
- All fire doors in Alfreton