Getting FD90 and FD120 fire doors fitted in Heanor
For landlords, managing agents, businesses and homeowners in Heanor, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Heanor is about 8 miles from Derby; we cover both, along with Ripley, Ilkeston and Belper.
What the law says in Heanor
Because Heanor is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Heanor?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Heanor quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Heanor, FD90 and FD120 fire doors are most often specified for generator rooms and high fire-load stores.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Derbyshire
Do you work for landlords and managing agents in Heanor?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Is the survey in Heanor free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Heanor?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Heanor
- Ripley (2 miles)
- Ilkeston (4 miles)
- Belper (6 miles)
- Alfreton (6 miles)
- Hucknall (7 miles)
- Kirkby-in-Ashfield (7 miles)
Also available in Heanor
- Fire-Rated Screens & Fanlights in Heanor
- HMO Fire Doors in Heanor
- FD30S Smoke Control Doorsets in Heanor
- Steel Fire Doors in Heanor
- Fire Door Ironmongery & Closers in Heanor
- Timber Fire Doorsets in Heanor
- Glazed Fire Doors in Heanor
- Fire Exit Doors in Heanor
- FD90 & FD120 Doorsets across Derbyshire
- All fire doors in Heanor