FD90 & FD120 Doorsets for Deeside buildings
For landlords, managing agents, businesses and homeowners in Deeside, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Deeside is about 11 miles from Wrexham. Wherever your building is in CH5, we arrange survey and fitting dates around access and occupancy.
What the law says in Deeside
Fire doors in Deeside are covered by the Welsh Building Regulations guidance for new work and by the Fire Safety Order 2005 for existing premises. Your fire risk assessment will say which doors need replacing and to what rating.
Guide prices in Deeside
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Deeside quote is fixed after survey and itemised door by door.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
Wherever they are in Deeside, FD90 and FD120 fire doors are most often specified for generator rooms and separating walls with long ratings.
North-east Wales combines Wrexham's city centre and industrial estates with Deeside's manufacturing and coastal resorts such as Rhyl and Colwyn Bay.
- Generator rooms
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Deeside
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Deeside
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Deeside.
Is the survey in Deeside free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Deeside?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Deeside and the rest of Clwyd, including CH5 and nearby Hawarden.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Also covering towns near Deeside
- Hawarden (1 mile)
- Buckley (3 miles)
- Flint (5 miles)
- Chester (6 miles)
- Ellesmere Port (8 miles)
- Heswall (9 miles)
Other products in Deeside
- FD30 Fire Doorsets in Deeside
- Stairwell & Escape Route Doors in Deeside
- Steel Fire Doors in Deeside
- Double & Leaf-and-a-Half Fire Doors in Deeside
- HMO Fire Doors in Deeside
- Fire Exit Doors in Deeside
- FD30S Smoke Control Doorsets in Deeside
- Glazed Fire Doors in Deeside
- FD90 & FD120 Doorsets across Clwyd
- All fire doors in Deeside