Certified FD90 and FD120 fire doors for Buckley
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Buckley, Clwyd. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Buckley surveys with other visits in Clwyd, such as Hawarden and Deeside, which helps keep survey dates flexible.
Which rules apply in Buckley?
Wales issues its own version of Approved Document B, so new and replacement fire doors in Buckley are specified against the Welsh guidance. The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, covering workplaces and the common parts of multi-occupied residential buildings, including flat entrance doors.
Cost of FD90 and FD120 fire doors in Clwyd
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Buckley quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are used in Buckley
Typical uses for FD90 and FD120 fire doors in Buckley include transformer and switch rooms and high fire-load stores.
North-east Wales combines Wrexham's city centre and industrial estates with Deeside's manufacturing and coastal resorts such as Rhyl and Colwyn Bay.
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Buckley: questions
Can you work around tenants or staff in Buckley?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD90 and FD120 fire doors in Buckley need to meet?
They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Buckley quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Buckley
- Hawarden (2 miles)
- Deeside (3 miles)
- Flint (6 miles)
- Chester (8 miles)
- Wrexham (9 miles)
- Ellesmere Port (11 miles)
Also available in Buckley
- Composite Fire Doors in Buckley
- Security Fire Doors in Buckley
- Fire Exit Doors in Buckley
- FD30 Fire Doorsets in Buckley
- Stairwell & Escape Route Doors in Buckley
- Timber Fire Doorsets in Buckley
- FD60 Fire Doorsets in Buckley
- Double & Leaf-and-a-Half Fire Doors in Buckley
- FD90 & FD120 Doorsets across Clwyd
- All fire doors in Buckley