Certified FD90 and FD120 fire doors for Flint
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Flint and the rest of Clwyd. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover CH6 and the surrounding area, including Deeside. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Flint?
In Flint the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
FD90 and FD120 fire doors prices in Flint
Our guide price for FD90 and FD120 fire doors in Flint is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Flint
Wherever they are in Flint, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and separating walls with long ratings.
North-east Wales combines Wrexham's city centre and industrial estates with Deeside's manufacturing and coastal resorts such as Rhyl and Colwyn Bay.
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Clwyd
Is the survey in Flint free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Flint?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Flint and the rest of Clwyd, including CH6 and nearby Deeside.
Can you fit just one door in Flint?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Clwyd.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Deeside (5 miles)
- Buckley (6 miles)
- Heswall (6 miles)
- Hawarden (6 miles)
- Bebington (9 miles)
- Ellesmere Port (10 miles)
Also available in Flint
- Flat Entrance Fire Doors in Flint
- FD30S Smoke Control Doorsets in Flint
- Riser & Service Cupboard Doors in Flint
- Fire Exit Doors in Flint
- Fire Doors for Homes in Flint
- FD60 Fire Doorsets in Flint
- Acoustic Fire Doors in Flint
- Double & Leaf-and-a-Half Fire Doors in Flint
- FD90 & FD120 Doorsets across Clwyd
- All fire doors in Flint