Certified FD60 fire doors for Newcastle upon Tyne
For landlords, managing agents, businesses and homeowners in Newcastle upon Tyne, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Surveys in Newcastle upon Tyne are booked around your access needs, and we cover the wider Tyne and Wear area too.
Regulations for FD60 fire doors in Tyne and Wear
In Newcastle upon Tyne, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD60 fire doors cost in Newcastle upon Tyne?
Our guide price for FD60 fire doors in Newcastle upon Tyne is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Newcastle upon Tyne
Wherever they are in Newcastle upon Tyne, FD60 fire doors are most often specified for plant and boiler rooms and stair cores in taller blocks.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you work around tenants or staff in Newcastle upon Tyne?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Newcastle upon Tyne free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Newcastle upon Tyne?
Yes. We survey, supply and fit FD60 fire doors throughout Newcastle upon Tyne and the rest of Tyne and Wear, including NE1 and nearby Gateshead.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
FD60 Fire Doorsets near Newcastle upon Tyne
- Gateshead (1 mile)
- Gosforth (2 miles)
- Felling (2 miles)
- Wallsend (3 miles)
- Hebburn (4 miles)
- Jarrow (5 miles)
Other fire doors in Newcastle upon Tyne
- Timber Fire Doorsets in Newcastle upon Tyne
- School & Healthcare Fire Doors in Newcastle upon Tyne
- Fire Doors for Homes in Newcastle upon Tyne
- Steel Fire Doors in Newcastle upon Tyne
- Riser & Service Cupboard Doors in Newcastle upon Tyne
- Acoustic Fire Doors in Newcastle upon Tyne
- Composite Fire Doors in Newcastle upon Tyne
- Fire Door Replacement in Newcastle upon Tyne
- FD60 Fire Doorsets across Tyne and Wear
- All fire doors in Newcastle upon Tyne