Certified FD60 fire doors for Crewe
Fire Rated Doors supplies and fits FD60 fire doors in Crewe, Cheshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Crewe is about 21 miles from Warrington; we cover both, along with Winsford, Kidsgrove and Congleton.
Fire door rules in Crewe
In Crewe, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Crewe
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Crewe, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Crewe
Typical uses for FD60 fire doors in Crewe include compartment walls and stair cores in taller blocks.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Cheshire
Do you cover Crewe?
Yes. We survey, supply and fit FD60 fire doors throughout Crewe and the rest of Cheshire, including CW1 and nearby Winsford.
What does a Crewe quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Crewe.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Nearby towns we cover
- Winsford (7 miles)
- Kidsgrove (9 miles)
- Congleton (11 miles)
- Newcastle-under-Lyme (11 miles)
- Northwich (12 miles)
- Stoke-on-Trent (12 miles)
Also available in Crewe
- Glazed Fire Doors in Crewe
- Security Fire Doors in Crewe
- Timber Fire Doorsets in Crewe
- Commercial & Office Fire Doors in Crewe
- School & Healthcare Fire Doors in Crewe
- Riser & Service Cupboard Doors in Crewe
- Flat Entrance Fire Doors in Crewe
- HMO Fire Doors in Crewe
- FD60 Fire Doorsets across Cheshire
- All fire doors in Crewe