Our Stoke-on-Trent supply and fit service
Fire Rated Doors supplies and fits fire door closers and ironmongery in Stoke-on-Trent, Staffordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Surveys in Stoke-on-Trent are booked around your access needs, and we cover the wider Staffordshire area too.
Which rules apply in Stoke-on-Trent?
In Stoke-on-Trent, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Fire door closers and ironmongery prices in Stoke-on-Trent
Our guide price for fire door closers and ironmongery in Stoke-on-Trent is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need fire door closers and ironmongery
Typical uses for fire door closers and ironmongery in Stoke-on-Trent include seal and signage replacement and failed closers and hinges.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Seal and signage replacement
- Failed closers and hinges
- Access control preparation
- Busy corridors needing hold-open
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Stoke-on-Trent: questions
Can you fit just one door in Stoke-on-Trent?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Staffordshire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stoke-on-Trent.
Is the survey in Stoke-on-Trent free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Nearby towns we cover
- Newcastle-under-Lyme (2 miles)
- Longton (2 miles)
- Kidsgrove (6 miles)
- Congleton (11 miles)
- Crewe (12 miles)
- Stafford (14 miles)
Other fire doors in Stoke-on-Trent
- Double & Leaf-and-a-Half Fire Doors in Stoke-on-Trent
- Glazed Fire Doors in Stoke-on-Trent
- Steel Fire Doors in Stoke-on-Trent
- Acoustic Fire Doors in Stoke-on-Trent
- Communal & Corridor Fire Doors in Stoke-on-Trent
- Commercial & Office Fire Doors in Stoke-on-Trent
- Riser & Service Cupboard Doors in Stoke-on-Trent
- FD60 Fire Doorsets in Stoke-on-Trent
- Fire Door Ironmongery & Closers across Staffordshire
- All fire doors in Stoke-on-Trent