Getting FD60 fire doors fitted in Mansfield
Fire Rated Doors supplies and fits FD60 fire doors in Mansfield, Nottinghamshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Mansfield is about 12 miles from Nottingham; we cover both, along with Sutton-in-Ashfield, Kirkby-in-Ashfield and Hucknall.
What the law says in Mansfield
New and replacement fire doors in Mansfield are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Mansfield
Guide prices for FD60 fire doors in Mansfield run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD60 fire doors
In Mansfield, FD60 fire doors are typically needed in higher-risk stores and stair cores in taller blocks.
Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.
- Higher-risk stores
- Stair cores in taller blocks
- Compartment walls
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Mansfield property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Nottinghamshire
What does a Mansfield quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Mansfield?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you cover Mansfield?
Yes. We survey, supply and fit FD60 fire doors throughout Mansfield and the rest of Nottinghamshire, including NG18 and nearby Sutton-in-Ashfield.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Neighbouring areas
- Sutton-in-Ashfield (2 miles)
- Kirkby-in-Ashfield (3 miles)
- Hucknall (7 miles)
- Alfreton (8 miles)
- Arnold (9 miles)
- Heanor (11 miles)
Other products in Mansfield
- FD30S Smoke Control Doorsets in Mansfield
- Fire-Rated Screens & Fanlights in Mansfield
- Composite Fire Doors in Mansfield
- Steel Fire Doors in Mansfield
- Fire Door Supply & Fit in Mansfield
- Fire Doors for Homes in Mansfield
- Fire Door Replacement in Mansfield
- Fire Door Ironmongery & Closers in Mansfield
- FD60 Fire Doorsets across Nottinghamshire
- All fire doors in Mansfield