Getting FD60 fire doors fitted in Arnold
We cover Arnold and nearby Nottingham for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Arnold surveys with other visits in Nottinghamshire, such as Nottingham and Hucknall, which helps keep survey dates flexible.
What the law says in Arnold
In Arnold, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD60 fire doors cost in Arnold?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Arnold are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
In Arnold, FD60 fire doors are typically needed in compartment walls and plant and boiler rooms.
Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Arnold: questions
Do you cover Arnold?
Yes. We survey, supply and fit FD60 fire doors throughout Arnold and the rest of Nottinghamshire, including NG5 and nearby Nottingham.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Arnold.
Can you work around tenants or staff in Arnold?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Nottingham (3 miles)
- Hucknall (4 miles)
- West Bridgford (5 miles)
- Ilkeston (7 miles)
- Kirkby-in-Ashfield (8 miles)
- Long Eaton (9 miles)
Also available in Arnold
- Commercial & Office Fire Doors in Arnold
- Fire Doors for Homes in Arnold
- Communal & Corridor Fire Doors in Arnold
- Stairwell & Escape Route Doors in Arnold
- Composite Fire Doors in Arnold
- HMO Fire Doors in Arnold
- Glazed Fire Doors in Arnold
- Timber Fire Doorsets in Arnold
- FD60 Fire Doorsets across Nottinghamshire
- All fire doors in Arnold