FD60 fire doors in Kirkby-in-Ashfield

Certified FD60 fire doors for Kirkby-in-Ashfield

Getting FD60 fire doors right in Kirkby-in-Ashfield means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Kirkby-in-Ashfield is about 11 miles from Nottingham. Wherever your building is in NG17, we arrange survey and fitting dates around access and occupancy.

What the law says in Kirkby-in-Ashfield

Fire doors in Kirkby-in-Ashfield sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

What do FD60 fire doors cost in Kirkby-in-Ashfield?

Guide prices for FD60 fire doors in Kirkby-in-Ashfield run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Buildings that need FD60 fire doors

Compartment walls and plant and boiler rooms are among the most common settings for FD60 fire doors, in Kirkby-in-Ashfield as elsewhere.

Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.

Compartment walls
Plant and boiler rooms
Stair cores in taller blocks
Higher-risk stores

What you get with each doorset

Fire resistance	60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf	54mm timber or steel
Smoke control	FD60S available with tested smoke seals
Typical use	Compartment walls, firefighting shafts, plant rooms
Hinges	Usually four hinges on timber leaves, per test evidence

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Your questions answered

Can you work around tenants or staff in Kirkby-in-Ashfield?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Kirkby-in-Ashfield.

Is the survey in Kirkby-in-Ashfield free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

FD60 Fire Doorsets in Kirkby-in-Ashfield