FD60 fire doors in Nottingham: how we work
We fit FD60 doorsets for compartment walls, cores and plant rooms in Nottingham and the rest of Nottinghamshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover Nottingham and the rest of Nottinghamshire, with surveys arranged around your building's access and occupancy.
Fire door rules in Nottingham
Because Nottingham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD60 fire doors prices in Nottingham
Guide prices for FD60 fire doors in Nottingham run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Nottingham include compartment walls and stair cores in taller blocks.
Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Nottingham
Can you work around tenants or staff in Nottingham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Nottingham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Nottingham?
We arrange surveys around your access needs and, where possible, combine Nottingham visits with other work in Nottinghamshire. Tell us your preferred dates when you enquire.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Nearby towns we cover
- West Bridgford (2 miles)
- Arnold (3 miles)
- Hucknall (6 miles)
- Long Eaton (6 miles)
- Ilkeston (7 miles)
- Heanor (9 miles)
More doorsets for Nottingham
- Commercial & Office Fire Doors in Nottingham
- Fire Exit Doors in Nottingham
- Glazed Fire Doors in Nottingham
- School & Healthcare Fire Doors in Nottingham
- Double & Leaf-and-a-Half Fire Doors in Nottingham
- Communal & Corridor Fire Doors in Nottingham
- HMO Fire Doors in Nottingham
- Riser & Service Cupboard Doors in Nottingham
- FD60 Fire Doorsets across Nottinghamshire
- All fire doors in Nottingham