Certified FD90 and FD120 fire doors for Tunbridge Wells
For landlords, managing agents, businesses and homeowners in Tunbridge Wells, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
We cover TN1 and the surrounding area, including Tonbridge. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Tunbridge Wells?
Because Tunbridge Wells is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Kent
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Tunbridge Wells are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are used in Tunbridge Wells
Separating walls with long ratings and transformer and switch rooms are among the most common settings for FD90 and FD120 fire doors, in Tunbridge Wells as elsewhere.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Tunbridge Wells
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Kent
Can you work around tenants or staff in Tunbridge Wells?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Tunbridge Wells?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Tunbridge Wells and the rest of Kent, including TN1 and nearby Tonbridge.
Will I get certificates for the doors fitted in Tunbridge Wells?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Tonbridge (4 miles)
- Crowborough (7 miles)
- Sevenoaks (10 miles)
- East Grinstead (12 miles)
- Maidstone (14 miles)
- Caterham (18 miles)
Other fire doors in Tunbridge Wells
- Composite Fire Doors in Tunbridge Wells
- HMO Fire Doors in Tunbridge Wells
- Steel Fire Doors in Tunbridge Wells
- Double & Leaf-and-a-Half Fire Doors in Tunbridge Wells
- Fire Exit Doors in Tunbridge Wells
- Timber Fire Doorsets in Tunbridge Wells
- Flat Entrance Fire Doors in Tunbridge Wells
- Riser & Service Cupboard Doors in Tunbridge Wells
- FD90 & FD120 Doorsets across Kent
- All fire doors in Tunbridge Wells