Getting FD60 fire doors fitted in Winchester
We fit FD60 doorsets for compartment walls, cores and plant rooms in Winchester and the rest of Hampshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Winchester is about 12 miles from Southampton; we cover both, along with Eastleigh, Southampton and Totton.
Regulations for FD60 fire doors in Hampshire
New and replacement fire doors in Winchester are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD60 fire doors in Hampshire
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Winchester are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Winchester
In Winchester, FD60 fire doors are typically needed in compartment walls and higher-risk stores.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Winchester
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you cover Winchester?
Yes. We survey, supply and fit FD60 fire doors throughout Winchester and the rest of Hampshire, including SO23 and nearby Eastleigh.
Can you work around tenants or staff in Winchester?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Winchester?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hampshire.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near Winchester
- Eastleigh (7 miles)
- Southampton (12 miles)
- Totton (12 miles)
- Andover (12 miles)
- Hythe (15 miles)
- Fareham (16 miles)
Other fire doors in Winchester
- Double & Leaf-and-a-Half Fire Doors in Winchester
- Commercial & Office Fire Doors in Winchester
- School & Healthcare Fire Doors in Winchester
- Fire Exit Doors in Winchester
- Glazed Fire Doors in Winchester
- Fire Door Replacement in Winchester
- Stairwell & Escape Route Doors in Winchester
- Communal & Corridor Fire Doors in Winchester
- FD60 Fire Doorsets across Hampshire
- All fire doors in Winchester