Our Andover supply and fit service
We cover Andover and nearby Winchester for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover SP10 and the surrounding area, including Winchester. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Andover
Fire doors in Andover sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Andover
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Andover, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
Wherever they are in Andover, FD60 fire doors are most often specified for compartment walls and higher-risk stores.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Compartment walls
- Higher-risk stores
- Plant and boiler rooms
- Stair cores in taller blocks
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Hampshire
Can you fit just one door in Andover?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hampshire.
Do you cover Andover?
Yes. We survey, supply and fit FD60 fire doors throughout Andover and the rest of Hampshire, including SP10 and nearby Winchester.
Is the survey in Andover free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Andover
- Winchester (12 miles)
- Newbury (15 miles)
- Salisbury (16 miles)
- Thatcham (17 miles)
- Basingstoke (18 miles)
- Eastleigh (18 miles)
Other fire doors in Andover
- FD90 & FD120 Doorsets in Andover
- Timber Fire Doorsets in Andover
- HMO Fire Doors in Andover
- Stairwell & Escape Route Doors in Andover
- FD30S Smoke Control Doorsets in Andover
- Glazed Fire Doors in Andover
- Fire Exit Doors in Andover
- Commercial & Office Fire Doors in Andover
- FD60 Fire Doorsets across Hampshire
- All fire doors in Andover