Getting FD60 fire doors fitted in Totton
For landlords, managing agents, businesses and homeowners in Totton, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Our Hampshire coverage includes Totton and its neighbours Southampton, Hythe and Eastleigh; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Totton?
In Totton, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD60 fire doors in Hampshire
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Totton, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD60 fire doors are used in Totton
Plant and boiler rooms and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Totton as elsewhere.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Totton: questions
Can you fit just one door in Totton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Hampshire.
Can you work around tenants or staff in Totton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD60 fire doors in Totton need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Neighbouring areas
- Southampton (4 miles)
- Hythe (6 miles)
- Eastleigh (7 miles)
- Winchester (12 miles)
- New Milton (14 miles)
- Cowes (14 miles)
Other fire doors in Totton
- Fire Door Ironmongery & Closers in Totton
- Glazed Fire Doors in Totton
- FD30 Fire Doorsets in Totton
- Acoustic Fire Doors in Totton
- Fire Exit Doors in Totton
- Fire Door Replacement in Totton
- Communal & Corridor Fire Doors in Totton
- Composite Fire Doors in Totton
- FD60 Fire Doorsets across Hampshire
- All fire doors in Totton