FD60 fire doors in Eastleigh: how we work
Getting FD60 fire doors right in Eastleigh means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Eastleigh is about 5 miles from Southampton; we cover both, along with Southampton, Winchester and Totton.
Regulations for FD60 fire doors in Hampshire
In Eastleigh, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Eastleigh
Guide prices for FD60 fire doors in Eastleigh run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are used in Eastleigh
Wherever they are in Eastleigh, FD60 fire doors are most often specified for compartment walls and plant and boiler rooms.
Hampshire spans Southampton and Portsmouth's port cities, student and naval housing, and commuter towns with business parks and new estates.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Eastleigh
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Hampshire
What does a Eastleigh quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Eastleigh?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Eastleigh free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Also covering towns near Eastleigh
- Southampton (5 miles)
- Winchester (7 miles)
- Totton (7 miles)
- Hythe (7 miles)
- Fareham (11 miles)
- Cowes (14 miles)
Other fire doors in Eastleigh
- HMO Fire Doors in Eastleigh
- Acoustic Fire Doors in Eastleigh
- Flat Entrance Fire Doors in Eastleigh
- Composite Fire Doors in Eastleigh
- Stairwell & Escape Route Doors in Eastleigh
- Communal & Corridor Fire Doors in Eastleigh
- Fire Door Ironmongery & Closers in Eastleigh
- Timber Fire Doorsets in Eastleigh
- FD60 Fire Doorsets across Hampshire
- All fire doors in Eastleigh