FD60 fire doors in Ebbw Vale | Supplied & Fitted

FD60 fire doors in Ebbw Vale: how we work

If your fire risk assessment in Ebbw Vale has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in NP23 are free and quotes are fixed and itemised.

Whether your building is in central Ebbw Vale or on its edges towards Merthyr Tydfil, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

What the law says in Ebbw Vale

In Ebbw Vale the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.

FD60 fire doors prices in Ebbw Vale

Our guide price for FD60 fire doors in Ebbw Vale is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Where FD60 fire doors are needed

In Ebbw Vale, FD60 fire doors are typically needed in plant and boiler rooms and higher-risk stores.

Gwent centres on Newport's city centre and council estates, with Cwmbran, Pontypool and the valleys towns adding schools and industry.

Plant and boiler rooms
Higher-risk stores
Compartment walls
Stair cores in taller blocks

Doorset specification

Fire resistance	60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf	54mm timber or steel
Smoke control	FD60S available with tested smoke seals
Typical use	Compartment walls, firefighting shafts, plant rooms
Hinges	Usually four hinges on timber leaves, per test evidence

See the full specification and options for FD60 Fire Doorsets

How it works in Ebbw Vale

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

FD60 fire doors in Ebbw Vale: questions

Can you fit just one door in Ebbw Vale?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Gwent.

Is the survey in Ebbw Vale free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can you work around tenants or staff in Ebbw Vale?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

FD60 Fire Doorsets in Ebbw Vale