FD60 fire doors in Risca: how we work
Fire Rated Doors supplies and fits FD60 fire doors in Risca, Gwent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Risca or on its edges towards Newport, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Risca
In Risca the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
Cost of FD60 fire doors in Gwent
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Risca are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
Wherever they are in Risca, FD60 fire doors are most often specified for plant and boiler rooms and stair cores in taller blocks.
Gwent centres on Newport's city centre and council estates, with Cwmbran, Pontypool and the valleys towns adding schools and industry.
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
- Higher-risk stores
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Risca
Will I get certificates for the doors fitted in Risca?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Risca quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Risca free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
- Newport, Gwent (4 miles)
- Cwmbran (4 miles)
- Caerphilly (6 miles)
- Pontypool (7 miles)
- Cardiff (9 miles)
- Pontypridd (11 miles)
More doorsets for Risca
- Fire Doors for Homes in Risca
- Fire Door Supply & Fit in Risca
- Communal & Corridor Fire Doors in Risca
- Fire Exit Doors in Risca
- Acoustic Fire Doors in Risca
- Double & Leaf-and-a-Half Fire Doors in Risca
- Flat Entrance Fire Doors in Risca
- Commercial & Office Fire Doors in Risca
- FD60 Fire Doorsets across Gwent
- All fire doors in Risca