Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Bury

We supply and fit FD30S fire doors in Bury (BL9) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £800 per single doorset in Bury, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Bury

Getting FD30S fire doors right in Bury means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Bury is about 9 miles from Manchester; we cover both, along with Radcliffe, Heywood and Whitefield.

Fire door rules in Bury

New and replacement fire doors in Bury are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

FD30S fire doors prices in Bury

Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Bury are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD30S fire doors are needed

Lobby doors in blocks of flats and protected stairways are among the most common settings for FD30S fire doors, in Bury as elsewhere.

Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.

  • Lobby doors in blocks of flats
  • Protected stairways
  • Integral garage doors
  • Cross-corridor doors

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Greater Manchester

Will I get certificates for the doors fitted in Bury?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules do FD30S fire doors in Bury need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can you fit just one door in Bury?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater Manchester.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

Neighbouring areas

Other fire doors in Bury

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.