Our Belper supply and fit service
If your fire risk assessment in Belper has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in DE56 are free and quotes are fixed and itemised.
Whether your building is in central Belper or on its edges towards Ripley, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD60 fire doors in Derbyshire
New and replacement fire doors in Belper are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD60 fire doors in Derbyshire
Our guide price for FD60 fire doors in Belper is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Belper include stair cores in taller blocks and plant and boiler rooms.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Belper: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Belper.
Is the survey in Belper free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD60 fire doors in Belper need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Ripley (4 miles)
- Heanor (6 miles)
- Alfreton (7 miles)
- Derby (7 miles)
- Ilkeston (8 miles)
- Kirkby-in-Ashfield (11 miles)
Other products in Belper
- Fire Doors for Homes in Belper
- FD90 & FD120 Doorsets in Belper
- Fire Door Supply & Fit in Belper
- Fire-Rated Screens & Fanlights in Belper
- Security Fire Doors in Belper
- HMO Fire Doors in Belper
- Fire Exit Doors in Belper
- Acoustic Fire Doors in Belper
- FD60 Fire Doorsets across Derbyshire
- All fire doors in Belper