Certified FD60 fire doors for Derby
If your fire risk assessment in Derby has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in DE1 are free and quotes are fixed and itemised.
Derby is one of the main towns we cover in Derbyshire; tell us your dates and we'll arrange a survey.
What the law says in Derby
Because Derby is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD60 fire doors prices in Derby
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Derby are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD60 fire doors
Higher-risk stores and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Derby as elsewhere.
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Will I get certificates for the doors fitted in Derby?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Derby.
Can you work around tenants or staff in Derby?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Belper (7 miles)
- Ilkeston (7 miles)
- Heanor (8 miles)
- Ripley (8 miles)
- Long Eaton (9 miles)
- Burton upon Trent (11 miles)
Other fire doors in Derby
- Stairwell & Escape Route Doors in Derby
- Fire-Rated Screens & Fanlights in Derby
- Double & Leaf-and-a-Half Fire Doors in Derby
- Fire Door Ironmongery & Closers in Derby
- Acoustic Fire Doors in Derby
- Fire Doors for Homes in Derby
- Fire Door Replacement in Derby
- FD30S Smoke Control Doorsets in Derby
- FD60 Fire Doorsets across Derbyshire
- All fire doors in Derby