Flat Entrance Fire Doors for Crewe buildings
Fire Rated Doors supplies and fits flat entrance fire doors in Crewe, Cheshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Crewe is about 21 miles from Warrington; we cover both, along with Winsford, Kidsgrove and Congleton.
What the law says in Crewe
In Crewe, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Crewe
Our guide price for flat entrance fire doors in Crewe is £1,250 to £2,300 per door including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where flat entrance fire doors are used in Crewe
Wherever they are in Crewe, flat entrance fire doors are most often specified for blocks of flats and student and build-to-rent blocks.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Blocks of flats
- Student and build-to-rent blocks
- Supported housing
- Converted buildings with shared stairs
What you get with each doorset
| Fire & smoke | FD30S / E30 Sa as standard |
|---|---|
| Security | PAS 24:2022 options; Approved Document Q requires PAS 24 or equivalent for new dwellings in England |
| Hardware | Self-closer, multipoint or nightlatch, fire-rated spyhole and letterplate where tested |
| Materials | Timber, composite or steel-faced |
| Acoustic | Acoustic-rated options for noisy corridors |
See the full specification and options for Flat Entrance Fire Doors
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Flat entrance fire doors in Crewe: questions
Is the survey in Crewe free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Crewe.
Can you work around tenants or staff in Crewe?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How long does fitting take?
A single flat entrance doorset usually takes a few hours to fit, including the new frame. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Nearby towns we cover
- Winsford (7 miles)
- Kidsgrove (9 miles)
- Congleton (11 miles)
- Newcastle-under-Lyme (11 miles)
- Northwich (12 miles)
- Stoke-on-Trent (12 miles)
Also available in Crewe
- Fire Exit Doors in Crewe
- FD90 & FD120 Doorsets in Crewe
- Steel Fire Doors in Crewe
- Commercial & Office Fire Doors in Crewe
- Fire Door Replacement in Crewe
- Double & Leaf-and-a-Half Fire Doors in Crewe
- Security Fire Doors in Crewe
- FD30 Fire Doorsets in Crewe
- Flat Entrance Fire Doors across Cheshire
- All fire doors in Crewe