Getting FD30S fire doors fitted in Nailsea
We cover Nailsea and nearby Portishead for FD30S fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Nailsea surveys with other visits in Somerset, such as Portishead and Clevedon, which helps keep survey dates flexible.
What the law says in Nailsea
Because Nailsea is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Nailsea
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Nailsea are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Nailsea
Typical uses for FD30S fire doors in Nailsea include protected stairways and cross-corridor doors.
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- Protected stairways
- Cross-corridor doors
- Lobby doors in blocks of flats
- Integral garage doors
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Will I get certificates for the doors fitted in Nailsea?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Nailsea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Nailsea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
FD30S Smoke Control Doorsets near Nailsea
- Portishead (4 miles)
- Clevedon (4 miles)
- Bristol (7 miles)
- Kingswood (11 miles)
- Weston-super-Mare (11 miles)
- Mangotsfield (12 miles)
Other products in Nailsea
- Stairwell & Escape Route Doors in Nailsea
- FD60 Fire Doorsets in Nailsea
- FD90 & FD120 Doorsets in Nailsea
- Fire Exit Doors in Nailsea
- Riser & Service Cupboard Doors in Nailsea
- Fire Door Supply & Fit in Nailsea
- Composite Fire Doors in Nailsea
- Flat Entrance Fire Doors in Nailsea
- FD30S Smoke Control Doorsets across Somerset
- All fire doors in Nailsea