Getting fire door closers and ironmongery fitted in Ramsgate
For landlords, managing agents, businesses and homeowners in Ramsgate, we provide fire door closers, hinges and hold-open devices with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Ramsgate is about 39 miles from Maidstone. Wherever your building is in CT11, we arrange survey and fitting dates around access and occupancy.
Regulations for fire door closers and ironmongery in Kent
Because Ramsgate is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do fire door closers and ironmongery cost in Ramsgate?
Our guide price for fire door closers and ironmongery in Ramsgate is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Ramsgate
Wherever they are in Ramsgate, fire door closers and ironmongery are most often specified for seal and signage replacement and access control preparation.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Seal and signage replacement
- Access control preparation
- Failed closers and hinges
- Busy corridors needing hold-open
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Ramsgate
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about fire door closers and ironmongery in Ramsgate
Can you work around tenants or staff in Ramsgate?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ramsgate.
Can you fit just one door in Ramsgate?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Kent.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Ramsgate
- Broadstairs (2 miles)
- Margate (4 miles)
- Deal (8 miles)
- Herne Bay (13 miles)
- Canterbury (15 miles)
- Dover (15 miles)
Other fire doors in Ramsgate
- Stairwell & Escape Route Doors in Ramsgate
- Glazed Fire Doors in Ramsgate
- FD90 & FD120 Doorsets in Ramsgate
- FD30 Fire Doorsets in Ramsgate
- School & Healthcare Fire Doors in Ramsgate
- Composite Fire Doors in Ramsgate
- Communal & Corridor Fire Doors in Ramsgate
- Fire Door Supply & Fit in Ramsgate
- Fire Door Ironmongery & Closers across Kent
- All fire doors in Ramsgate