Getting FD30S fire doors fitted in Richmond
If your fire risk assessment in Richmond has flagged doors to replace, we can schedule, quote and fit FD30S smoke control doorsets for flats, stairs and corridors to match its recommendations. Surveys in TW9 are free and quotes are fixed and itemised.
Whether your building is in central Richmond or on its edges towards Isleworth, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Richmond
Fire doors in Richmond sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD30S fire doors prices in Richmond
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Richmond are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Buildings that need FD30S fire doors
Wherever they are in Richmond, FD30S fire doors are most often specified for integral garage doors and cross-corridor doors.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Integral garage doors
- Cross-corridor doors
- Protected stairways
- Lobby doors in blocks of flats
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
How it works in Richmond
- Tell us about the doors — photos help
- Free measure survey at your Richmond property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD30S fire doors in Richmond
Which rules do FD30S fire doors in Richmond need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you work for landlords and managing agents in Richmond?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
What does a Richmond quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which doors in a block of flats need FD30S?
Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.
Neighbouring areas
- Isleworth (2 miles)
- Hounslow (2 miles)
- Barnes (2 miles)
- Chiswick (3 miles)
- Heston (3 miles)
- Acton (4 miles)
More doorsets for Richmond
- Acoustic Fire Doors in Richmond
- Glazed Fire Doors in Richmond
- School & Healthcare Fire Doors in Richmond
- FD30 Fire Doorsets in Richmond
- Stairwell & Escape Route Doors in Richmond
- Security Fire Doors in Richmond
- Fire Doors for Homes in Richmond
- Communal & Corridor Fire Doors in Richmond
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Richmond