Getting FD30 fire doors fitted in Richmond
Fire Rated Doors supplies and fits FD30 fire doors in Richmond, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover TW9 and the surrounding area, including Isleworth. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Richmond?
New and replacement fire doors in Richmond are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Richmond
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Richmond quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Richmond
Wherever they are in Richmond, FD30 fire doors are most often specified for HMO bedrooms and kitchens and plant rooms and stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- HMO bedrooms and kitchens
- Plant rooms and stores
- Offices and retail back-of-house
- Hotel corridors
FD30 Fire Doorsets: key specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30 fire doors in Richmond
How quickly can you survey in Richmond?
We arrange surveys around your access needs and, where possible, combine Richmond visits with other work in Greater London. Tell us your preferred dates when you enquire.
Can you work around tenants or staff in Richmond?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Richmond?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Does an FD30 door need a self-closer?
Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.
Nearby towns we cover
- Isleworth (2 miles)
- Hounslow (2 miles)
- Barnes (2 miles)
- Chiswick (3 miles)
- Heston (3 miles)
- Acton (4 miles)
Other products in Richmond
- Fire Door Replacement in Richmond
- Fire Door Supply & Fit in Richmond
- Fire Doors for Homes in Richmond
- FD60 Fire Doorsets in Richmond
- Fire Door Ironmongery & Closers in Richmond
- Fire Exit Doors in Richmond
- FD30S Smoke Control Doorsets in Richmond
- Double & Leaf-and-a-Half Fire Doors in Richmond
- FD30 Fire Doorsets across Greater London
- All fire doors in Richmond