Certified communal fire doors for Richmond
Need communal fire doors in Richmond? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around TW9. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
We cover TW9 and the surrounding area, including Isleworth. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Richmond?
Because Richmond is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of communal fire doors in Greater London
Our guide price for communal fire doors in Richmond is £1,600 to £3,200 per pair including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Richmond
Typical uses for communal fire doors in Richmond include blocks of flats and hotels.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Blocks of flats
- Hotels
- Student accommodation
- Sheltered and supported housing
What you get with each doorset
| Rating | FD30S typical; FD60S in some lobbies |
|---|---|
| Configuration | Singles, pairs and leaf-and-a-half |
| Glazing | Vision panels sized to the doorset's evidence |
| Hold-open | Alarm-linked magnetic hold-open or free-swing closers (BS EN 1155) |
| Accessibility | Opening forces and vision panels to accessibility guidance (Approved Document M in England) |
See the full specification and options for Communal & Corridor Fire Doors
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Will I get certificates for the doors fitted in Richmond?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Richmond?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Do you cover Richmond?
Yes. We survey, supply and fit communal fire doors throughout Richmond and the rest of Greater London, including TW9 and nearby Isleworth.
Should communal doors be glazed?
Doors across corridors usually need vision panels so people can see who is on the other side. The glass must be tested in that doorset.
Also covering towns near Richmond
- Isleworth (2 miles)
- Hounslow (2 miles)
- Barnes (2 miles)
- Chiswick (3 miles)
- Heston (3 miles)
- Acton (4 miles)
Also available in Richmond
- School & Healthcare Fire Doors in Richmond
- Fire-Rated Screens & Fanlights in Richmond
- Stairwell & Escape Route Doors in Richmond
- Fire Door Supply & Fit in Richmond
- Glazed Fire Doors in Richmond
- Riser & Service Cupboard Doors in Richmond
- Timber Fire Doorsets in Richmond
- Fire Doors for Homes in Richmond
- Communal & Corridor Fire Doors across Greater London
- All fire doors in Richmond