Certified FD30S fire doors for Hayes
Getting FD30S fire doors right in Hayes means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Hayes is about 13 miles from London. Wherever your building is in UB3, we arrange survey and fitting dates around access and occupancy.
Regulations for FD30S fire doors in Greater London
New and replacement fire doors in Hayes are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30S fire doors cost in Hayes?
Our guide price for FD30S fire doors in Hayes is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD30S fire doors are used in Hayes
Typical uses for FD30S fire doors in Hayes include protected stairways and integral garage doors.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Protected stairways
- Integral garage doors
- Lobby doors in blocks of flats
- Cross-corridor doors
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hayes.
What does a Hayes quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Hayes?
We arrange surveys around your access needs and, where possible, combine Hayes visits with other work in Greater London. Tell us your preferred dates when you enquire.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Also covering towns near Hayes
- Southall (2 miles)
- Heston (3 miles)
- Greenford (3 miles)
- Northolt (3 miles)
- Uxbridge (3 miles)
- Ruislip (4 miles)
Also available in Hayes
- School & Healthcare Fire Doors in Hayes
- Riser & Service Cupboard Doors in Hayes
- Flat Entrance Fire Doors in Hayes
- Fire-Rated Screens & Fanlights in Hayes
- FD60 Fire Doorsets in Hayes
- Security Fire Doors in Hayes
- Fire Door Ironmongery & Closers in Hayes
- Fire Doors for Homes in Hayes
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Hayes