Fire door closers and ironmongery in Hayes

Our Hayes supply and fit service

Getting fire door closers and ironmongery right in Hayes means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

We cover UB3 and the surrounding area, including Southall. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Regulations for fire door closers and ironmongery in Greater London

Because Hayes is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

What do fire door closers and ironmongery cost in Hayes?

Budget around £120 to £500 per item for fire door closers and ironmongery supplied and fitted in Hayes, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need fire door closers and ironmongery

Wherever they are in Hayes, fire door closers and ironmongery are most often specified for busy corridors needing hold-open and access control preparation.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

Busy corridors needing hold-open
Access control preparation
Failed closers and hinges
Seal and signage replacement

Fire Door Ironmongery & Closers: key specification

Closers	Overhead and concealed closers to BS EN 1154
Hinges	CE/UKCA-marked butt hinges to BS EN 1935
Hold-open	Electromagnetic and free-swing devices to BS EN 1155
Locks & latches	To BS EN 12209, tested with the doorset
Seals & signs	Intumescent and smoke seals; mandatory fire door signage

Elevation drawing of fire door ironmongery & closers

See the full specification and options for Fire Door Ironmongery & Closers

Four steps to compliant doors

Request a quote online or call
Survey: sizes, ratings, hardware and condition
Quote with each doorset's certification
Phased fitting and handover records

Common questions in Greater London

Can you work around tenants or staff in Hayes?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Which rules do fire door closers and ironmongery in Hayes need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

How quickly can you survey in Hayes?

We arrange surveys around your access needs and, where possible, combine Hayes visits with other work in Greater London. Tell us your preferred dates when you enquire.

What closer strength does a fire door need?

Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.

Fire Door Ironmongery & Closers in Hayes