Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Thornaby-on-Tees

We supply and fit FD30S fire doors in Thornaby-on-Tees (TS17) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £800 per single doorset in Thornaby-on-Tees, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Thornaby-on-Tees

We cover Thornaby-on-Tees and nearby Stockton-on-Tees for FD30S fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Whether your building is in central Thornaby-on-Tees or on its edges towards Stockton-on-Tees, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

What the law says in Thornaby-on-Tees

New and replacement fire doors in Thornaby-on-Tees are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Cost of FD30S fire doors in North Yorkshire

Our guide price for FD30S fire doors in Thornaby-on-Tees is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD30S fire doors are needed

Cross-corridor doors and protected stairways are among the most common settings for FD30S fire doors, in Thornaby-on-Tees as elsewhere.

North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.

  • Cross-corridor doors
  • Protected stairways
  • Integral garage doors
  • Lobby doors in blocks of flats

What you get with each doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

From enquiry to handover

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in North Yorkshire

What does a Thornaby-on-Tees quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Do you work for landlords and managing agents in Thornaby-on-Tees?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Can you fit just one door in Thornaby-on-Tees?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in North Yorkshire.

What is the difference between FD30 and FD30S?

Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.

FD30S Smoke Control Doorsets near Thornaby-on-Tees

Also available in Thornaby-on-Tees

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.