Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Ampthill

We supply and fit FD30S fire doors in Ampthill (MK45) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £800 per single doorset in Ampthill, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Ampthill

Looking for FD30S fire doors in Ampthill? Our supply and fit service covers MK45 and the surrounding area, including Bedford and Dunstable. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

Whether your building is in central Ampthill or on its edges towards Bedford, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

What the law says in Ampthill

Because Ampthill is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

FD30S fire doors prices in Ampthill

Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Ampthill are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD30S fire doors are needed

Typical uses for FD30S fire doors in Ampthill include cross-corridor doors and protected stairways.

Bedfordshire mixes Luton's dense housing and town-centre flats with Bedford's Victorian terraces, many now converted to flats and HMOs.

  • Cross-corridor doors
  • Protected stairways
  • Integral garage doors
  • Lobby doors in blocks of flats

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

From enquiry to handover

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

FD30S fire doors in Ampthill: questions

Is the survey in Ampthill free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Will I get certificates for the doors fitted in Ampthill?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you cover Ampthill?

Yes. We survey, supply and fit FD30S fire doors throughout Ampthill and the rest of Bedfordshire, including MK45 and nearby Bedford.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Nearby towns we cover

Other products in Ampthill

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.