Getting FD30S fire doors fitted in Bedford
Getting FD30S fire doors right in Bedford means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Bedfordshire coverage includes Bedford and its neighbours Ampthill, St Neots and Rushden; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Bedford?
Because Bedford is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD30S fire doors prices in Bedford
Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Bedford quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30S fire doors are needed
Typical uses for FD30S fire doors in Bedford include cross-corridor doors and integral garage doors.
Bedfordshire mixes Luton's dense housing and town-centre flats with Bedford's Victorian terraces, many now converted to flats and HMOs.
- Cross-corridor doors
- Integral garage doors
- Lobby doors in blocks of flats
- Protected stairways
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Bedford property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Will I get certificates for the doors fitted in Bedford?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you work for landlords and managing agents in Bedford?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you fit just one door in Bedford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Bedfordshire.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Nearby towns we cover
- Ampthill (7 miles)
- St Neots (10 miles)
- Rushden (12 miles)
- Milton Keynes (14 miles)
- Letchworth Garden City (15 miles)
- Hitchin (15 miles)
Also available in Bedford
- Stairwell & Escape Route Doors in Bedford
- FD60 Fire Doorsets in Bedford
- HMO Fire Doors in Bedford
- Double & Leaf-and-a-Half Fire Doors in Bedford
- Fire Doors for Homes in Bedford
- Fire Exit Doors in Bedford
- Composite Fire Doors in Bedford
- Fire Door Supply & Fit in Bedford
- FD30S Smoke Control Doorsets across Bedfordshire
- All fire doors in Bedford
