Our Dunstable supply and fit service
Looking for FD30S fire doors in Dunstable? Our supply and fit service covers LU6 and the surrounding area, including Luton and Leighton Buzzard. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our Bedfordshire coverage includes Dunstable and its neighbours Luton, Leighton Buzzard and Harpenden; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Dunstable
Fire doors in Dunstable sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD30S fire doors prices in Dunstable
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Dunstable are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD30S fire doors are needed
Wherever they are in Dunstable, FD30S fire doors are most often specified for cross-corridor doors and lobby doors in blocks of flats.
Bedfordshire mixes Luton's dense housing and town-centre flats with Bedford's Victorian terraces, many now converted to flats and HMOs.
- Cross-corridor doors
- Lobby doors in blocks of flats
- Protected stairways
- Integral garage doors
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD30S fire doors in Dunstable: questions
What does a Dunstable quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you work for landlords and managing agents in Dunstable?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
How quickly can you survey in Dunstable?
We arrange surveys around your access needs and, where possible, combine Dunstable visits with other work in Bedfordshire. Tell us your preferred dates when you enquire.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Neighbouring areas
- Luton (4 miles)
- Leighton Buzzard (6 miles)
- Harpenden (9 miles)
- Berkhamsted (9 miles)
- Hemel Hempstead (10 miles)
- Ampthill (10 miles)
More doorsets for Dunstable
- Riser & Service Cupboard Doors in Dunstable
- Security Fire Doors in Dunstable
- Double & Leaf-and-a-Half Fire Doors in Dunstable
- FD90 & FD120 Doorsets in Dunstable
- Timber Fire Doorsets in Dunstable
- Fire Exit Doors in Dunstable
- Fire-Rated Screens & Fanlights in Dunstable
- Fire Door Replacement in Dunstable
- FD30S Smoke Control Doorsets across Bedfordshire
- All fire doors in Dunstable