Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in Gwynedd

We supply and fit FD30 fire doors throughout Gwynedd, including Bangor and Holyhead, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in Gwynedd, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

FD30 fire doors in Gwynedd: how we work

Our Gwynedd service covers FD30 fire doors for flats, HMOs, workplaces, schools and homes, including Bangor and Holyhead.

What the law says in Gwynedd

In Gwynedd the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.

Cost of FD30 fire doors in Gwynedd

Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Gwynedd quote is fixed after survey and itemised door by door.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Buildings that need FD30 fire doors

Gwynedd and Anglesey are largely rural, with Bangor's university and hospital, hotels and holiday accommodation driving fire door work.

  • Offices and retail back-of-house
  • HMO bedrooms and kitchens
  • Hotel corridors
  • Plant rooms and stores

What's in the doorset

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

What happens next

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Which rules apply in Gwynedd?

Doors are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Does an FD30 door need a self-closer?

Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.

Towns in Gwynedd we cover for FD30 fire doors

FD30 Fire Doorsets in neighbouring areas

Other fire doors in Gwynedd

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.