Our Edmonton supply and fit service
We fit FD30 doorsets for flats, offices, HMOs and corridors in Edmonton and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Greater London coverage includes Edmonton and its neighbours Tottenham, Enfield and Chingford; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Edmonton
Because Edmonton is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD30 fire doors cost in Edmonton?
Budget around £750 to £1,150 per single doorset for FD30 fire doors supplied and fitted in Edmonton, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Edmonton
Typical uses for FD30 fire doors in Edmonton include HMO bedrooms and kitchens and plant rooms and stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- HMO bedrooms and kitchens
- Plant rooms and stores
- Offices and retail back-of-house
- Hotel corridors
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater London
Do you cover Edmonton?
Yes. We survey, supply and fit FD30 fire doors throughout Edmonton and the rest of Greater London, including N9 and nearby Tottenham.
What does a Edmonton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Edmonton.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Also covering towns near Edmonton
- Tottenham (2 miles)
- Enfield (2 miles)
- Chingford (2 miles)
- Walthamstow (3 miles)
- Wood Green (3 miles)
- Woodford Green (4 miles)
Also available in Edmonton
- Commercial & Office Fire Doors in Edmonton
- Fire Door Ironmongery & Closers in Edmonton
- Stairwell & Escape Route Doors in Edmonton
- FD30S Smoke Control Doorsets in Edmonton
- Double & Leaf-and-a-Half Fire Doors in Edmonton
- Steel Fire Doors in Edmonton
- HMO Fire Doors in Edmonton
- Fire Exit Doors in Edmonton
- FD30 Fire Doorsets across Greater London
- All fire doors in Edmonton