Our Battersea supply and fit service
We fit FD30 doorsets for flats, offices, HMOs and corridors in Battersea and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Greater London coverage includes Battersea and its neighbours Chelsea, Pimlico and Westminster; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Battersea?
New and replacement fire doors in Battersea are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30 fire doors in Greater London
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Battersea quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are needed
Typical uses for FD30 fire doors in Battersea include HMO bedrooms and kitchens and hotel corridors.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
- Offices and retail back-of-house
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Battersea
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30 fire doors in Battersea
What does a Battersea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Battersea free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Battersea?
Yes. We survey, supply and fit FD30 fire doors throughout Battersea and the rest of Greater London, including SW11 and nearby Chelsea.
Does an FD30 door need a self-closer?
Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.
Neighbouring areas
- Chelsea (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Fulham (2 miles)
- Brixton (2 miles)
- London (2 miles)
Also available in Battersea
- Commercial & Office Fire Doors in Battersea
- Steel Fire Doors in Battersea
- Composite Fire Doors in Battersea
- Flat Entrance Fire Doors in Battersea
- Riser & Service Cupboard Doors in Battersea
- Security Fire Doors in Battersea
- Fire Door Ironmongery & Closers in Battersea
- Fire Doors for Homes in Battersea
- FD30 Fire Doorsets across Greater London
- All fire doors in Battersea