Getting security fire doors fitted in Chelsea
Looking for security fire doors in Chelsea? Our supply and fit service covers SW3 and the surrounding area, including Battersea and Fulham. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our Greater London coverage includes Chelsea and its neighbours Battersea, Fulham and Pimlico; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Chelsea
New and replacement fire doors in Chelsea are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Chelsea
Guide prices for security fire doors in Chelsea run from about £1,600 to £3,500 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Chelsea
Flat entrance doors and pharmacies and cash rooms are among the most common settings for security fire doors, in Chelsea as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Flat entrance doors
- Pharmacies and cash rooms
- IT and comms rooms
- Plant rooms with valuable equipment
What's in the doorset
| Security | PAS 24:2022 or LPS 1175 ratings |
|---|---|
| Fire | FD30 to FD60, steel or timber |
| Locking | Multipoint and high-security locks tested with the doorset |
| Typical use | Flat entrances, plant rooms, pharmacies, cash and IT rooms |
| Evidence | Fire and security certification for the same configuration |
See the full specification and options for Security Fire Doors
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Chelsea property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Can you work around tenants or staff in Chelsea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Chelsea?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Is the survey in Chelsea free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Is PAS 24 required for flat front doors?
For new dwellings in England, Approved Document Q requires doorsets giving access to a dwelling to meet PAS 24 or equivalent.
Also covering towns near Chelsea
- Battersea (1 mile)
- Fulham (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Notting Hill (2 miles)
- London (2 miles)
Other products in Chelsea
- School & Healthcare Fire Doors in Chelsea
- HMO Fire Doors in Chelsea
- Fire Doors for Homes in Chelsea
- Composite Fire Doors in Chelsea
- Commercial & Office Fire Doors in Chelsea
- FD90 & FD120 Doorsets in Chelsea
- FD30S Smoke Control Doorsets in Chelsea
- Fire Exit Doors in Chelsea
- Security Fire Doors across Greater London
- All fire doors in Chelsea