Riser cupboard fire doors in Bedworth

Our Bedworth supply and fit service

For landlords, managing agents, businesses and homeowners in Bedworth, we provide fire-rated riser and service cupboard doors with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.

Bedworth is about 3 miles from Nuneaton; we cover both, along with Nuneaton, Coventry and Hinckley.

Which rules apply in Bedworth?

In Bedworth, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Riser cupboard fire doors prices in Bedworth

Our guide price for riser cupboard fire doors in Bedworth is £550 to £950 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Typical uses in Bedworth

In Bedworth, riser cupboard fire doors are typically needed in meter cupboards and electrical and data risers.

Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.

Meter cupboards
Electrical and data risers
Plumbing ducts
Bin and store cupboards

What you get with each doorset

Rating	At least half the shaft wall's rating, 30 minutes minimum — FD30 typical
Closing	Kept locked shut; self-closer not normally required
Locking	Flush cylinder or budget lock, tested with the door
Finish	Flush, painted or laminated to match the corridor
Signage	Fire door keep locked

Elevation drawing of riser & service cupboard doors

See the full specification and options for Riser & Service Cupboard Doors

What happens next

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Your questions answered

Is the survey in Bedworth free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Will I get certificates for the doors fitted in Bedworth?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Bedworth?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What rating does a riser door need?

In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.

Riser & Service Cupboard Doors in Bedworth