Certified FD30S fire doors for Bedworth
We cover Bedworth and nearby Nuneaton for FD30S fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Bedworth is about 3 miles from Nuneaton. Wherever your building is in CV12, we arrange survey and fitting dates around access and occupancy.
Regulations for FD30S fire doors in Warwickshire
In Bedworth, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD30S fire doors cost in Bedworth?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Bedworth are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD30S fire doors
Typical uses for FD30S fire doors in Bedworth include integral garage doors and protected stairways.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Integral garage doors
- Protected stairways
- Lobby doors in blocks of flats
- Cross-corridor doors
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30S fire doors in Bedworth
Which rules do FD30S fire doors in Bedworth need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How quickly can you survey in Bedworth?
We arrange surveys around your access needs and, where possible, combine Bedworth visits with other work in Warwickshire. Tell us your preferred dates when you enquire.
What does a Bedworth quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Nearby towns we cover
- Nuneaton (3 miles)
- Coventry (6 miles)
- Hinckley (6 miles)
- Kenilworth (10 miles)
- Rugby (11 miles)
- Leamington Spa (14 miles)
Also available in Bedworth
- Commercial & Office Fire Doors in Bedworth
- Fire-Rated Screens & Fanlights in Bedworth
- Fire Door Ironmongery & Closers in Bedworth
- Flat Entrance Fire Doors in Bedworth
- FD30 Fire Doorsets in Bedworth
- Communal & Corridor Fire Doors in Bedworth
- Stairwell & Escape Route Doors in Bedworth
- FD60 Fire Doorsets in Bedworth
- FD30S Smoke Control Doorsets across Warwickshire
- All fire doors in Bedworth