Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 typicalKeep lockedFlush

Riser & Service Cupboard Doors in Coalville

We supply and fit riser cupboard fire doors in Coalville (LE67) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £550 per single doorset in Coalville, supplied & fitted, ex VAT

Flush painted service riser cupboard door set into a corridor wall

Our Coalville supply and fit service

Getting riser cupboard fire doors right in Coalville means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Coalville is about 12 miles from Leicester. Wherever your building is in LE67, we arrange survey and fitting dates around access and occupancy.

Regulations for riser cupboard fire doors in Leicestershire

New and replacement fire doors in Coalville are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

What do riser cupboard fire doors cost in Coalville?

Expect roughly £550–£950 per single doorset for riser cupboard fire doors, fitted, ex VAT. Your Coalville quote is fixed after survey and itemised door by door.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Where riser cupboard fire doors are needed

In Coalville, riser cupboard fire doors are typically needed in plumbing ducts and meter cupboards.

Leicester's city-centre flats, student blocks and industrial buildings sit alongside Loughborough's university and market towns across the county.

  • Plumbing ducts
  • Meter cupboards
  • Bin and store cupboards
  • Electrical and data risers

What you get with each doorset

RatingAt least half the shaft wall's rating, 30 minutes minimum — FD30 typical
ClosingKept locked shut; self-closer not normally required
LockingFlush cylinder or budget lock, tested with the door
FinishFlush, painted or laminated to match the corridor
SignageFire door keep locked
Elevation drawing of riser & service cupboard doors

See the full specification and options for Riser & Service Cupboard Doors

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

What does a Coalville quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Will I get certificates for the doors fitted in Coalville?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Coalville?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What rating does a riser door need?

In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.

Also covering towns near Coalville

Other products in Coalville

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.