Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
SurveyLike-for-likeHandover pack

Fire Door Replacement in Perth

We supply and fit fire door replacement in Perth (PH2) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £750 per doorset in Perth, supplied & fitted, ex VAT

Tradesperson lifting a new white fire door leaf into a frame in a corridor

Fire door replacement in Perth: how we work

If your fire risk assessment in Perth has flagged doors to replace, we can schedule, quote and fit fire door replacement with certified doorsets to match its recommendations. Surveys in PH2 are free and quotes are fixed and itemised.

Perth is one of the main towns we cover in Perth & Kinross; tell us your dates and we'll arrange a survey.

What the law says in Perth

Fire doors in Perth follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.

Cost of fire door replacement in Perth & Kinross

Expect roughly £750–£1,150 per doorset for fire door replacement, fitted, ex VAT. Your Perth quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where fire door replacement are used in Perth

Doors with no evidence of rating and doors failed at inspection are among the most common settings for fire door replacement, in Perth as elsewhere.

Perth and Kinross mixes Perth's city centre and offices with rural hotels, schools and care homes.

  • Doors with no evidence of rating
  • Doors failed at inspection
  • Regulation 10 remedial work
  • Refurbishment programmes

What's in the doorset

Starts fromYour fire risk assessment, inspection report or our survey
ScopeRemove old door and frame, fit new certified doorset, make good
DisposalOld doors removed and disposed of
ProgrammePhased around occupied buildings
HandoverCertificate references, installation record and photos
Elevation drawing of fire door replacement

See the full specification and options for Fire Door Replacement

How it works in Perth

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Will I get certificates for the doors fitted in Perth?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules do fire door replacement in Perth need to meet?

They are specified to the Scottish Building Standards Technical Handbooks and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can you work around tenants or staff in Perth?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What happens to the old doors?

We remove and dispose of them as part of the job.

Fire Door Replacement near Perth

More doorsets for Perth

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.